Our telephone order center does NOT have access to parts.
If you don't have a Needak® rebounder, you might be able to use these parts on your rebounder. Study the descriptions below carefully to determine if our parts will fit your rebounder.
All of the following parts are designed specifically for the Needak® rebounder.
Specifications are:
40 inch diameter frame with six 1 inch diameter legs which are attached to the frame with a heavy duty spring.
36 Springs connecting on one end to 36 Clevis Pins that pass through the frame and at the other end connect to 18 metal cleat that are sewn into the jump mat.
The Needak® Soft-Bounce™ rebounder utilizes a 41⁄4 inch (hook to hook) barrel spring with coils that taper from the center to the outside. The center coils are approximately 1®˚ inch in diameter and the coil near the spring hook is approximately ®˛ inch in diameter. The legs of this rebounder are 9 inches long. The Permatron® jump mat is approximately 281⁄2 inches in diameter.
The "Classic" rebounder utilizes a 31⁄4 inch (hook to hook) spring. All coils are approximately 3⁄4 inch in diameter. The legs of this rebounder are 71⁄2 inches long. The Permatron® jump mat is approximately 301⁄2 inches in diameter.
